Self Shielded Flux Cored Hard Surfacing Welding Wire

Model NO.
HH-700B
Chromium Carbide Percentage
57-60%
Percentage of Chromium Carbide in Pure W
23-27%
Percentage of Manganese Carbide in Pure
0.8-1.1%
Manganese Carbide Percentage
1.6-2.0%
Molybdenum Carbide Percentage
0.15-0.25%
HRC
58-62
Percentage of Pure Nickel Carbide in Wel
0.08-0.15%
Trademark
Fehong
Specification
2.8mm
Origin
China (Mainland)
We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for Self Shielded Flux Cored Hard Surfacing Welding Wire, The product will supply to all over the world, such as: Kyrgyzstan, Libya, Netherlands, Our company always concentrate on the development of the international market. We now have a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
Guangxi Fehong Wear Resistant Technology Co., Ltd. Diamond / Audited Supplier

Product Description

HH-700B 2.8mm flux cored welding wire for wear plate It has high abrasion resistance and medium impact. There are slight cracks on hardfacing and it can not be machined.

Main chemical composition and hardness of surfacing welding:
 

2.8mm flux cored welding wire for wear plate Chimeical Element and HRC

Specification (mm)

C

Cr

Mn

Mo

Ni

other metal elements

 

 

HRC

HH-700B

11-12.5

57-60

1.6-2.0

0.15-0.25

0.12-0.22

micro

 

 

 

58-62

 

Pure weld deposit

4.3-4.8

23-27

0.8-1.1

0.08-0.18 0.08-0.15

Current (A)

300-380

Voltage (V)

28-31

Stick out (mm)

30-55

Application:

2.8mm flux cored welding wire for wear plate Special welding wire for wear resistant steel plate is suitable for chute, sieve plate, conveying passage, pipeline, wear resistant liner, fan shell, sheath, silo, bushing etc. under moderate impact and high wear environment. The application temperature is not more than 350°C. In the process of using, the smoothness of base material is guaranteed, the swing welding jigging distance is 33mm, and the swing welding distance is 35m. M, the thickness of single layer is between 2-4.5m m, and the surfacing slag ash should be cleaned up in time.

Related Products:

HH-806 Open arc hardfacing flux cored welding wire:
It is suitable for laying the bottom layer and surfacing harder materials on it. It is used for manufacturing or repairing grinding rollers, extrusion rollers, crane wheels, etc.
Welding hardness: 200-250HB
Diameter: 2.8mm

HH-810 Open arc hardfacing flux cored welding wire:
Suitable for high and medium impact wear under component hardfacing, for example: vertical mill roller, grinding, extrusion roller, propeller (device), surface layer, sand dredging machine, planing plate at the top of the tooth, the application temperature not exceeding 350°C
Welding hardness: 58-63HRC
Diameter: 2.8mm

More choices:

 

Our company wear resistant flux cored welding wire Production process:

After cutting and joining into the steel strip with our fixed width, the roller squeezes our steel strip into “U Type” form (1.2) and filled up with flux powder with our own special ingredient(3.4). The primary Open arc hardfacing flux cored welding wire processing are continuously to stretch through the different diameter of the abrasive tool(5.6.7.8). After that, our Open arc hardfacing flux cored welding wire processing  are going to be packed without a joint into Drum (9) or Spool with water poof and desiccant. During the process and after process we have strictly inspection policy about the filling rate, bending rate, chemical composition and welding perform etc.

Main Features:

1. Chemical Composition: High carbon high chromium
2. Hardness: HRC58-62
3. Good Performance: no clearing slag, low welding spatter, smooth surface, high welding efficiency, stable filling rate, etc.
4. Welding wire without any joints.
5. Production Capacity: 2000 tons per year
6. Short Delivery Time: Generally 10 days
7. We have many experienced professionals to research and develop welding wires according to customers specified chemical compositions.
8. We can recommend proper welding wires and provide technical solutions based on working conditions.
9. On site inspection and third party inspection are available.
10. As an ISO9001:2008 approved manufacture, our mission is to improve our management system and provide high quality products continuously.

 

Company Information

  

Now we have more than 140 employees, including more than 10 R&D staffs. And more than 20 wear plate production lines, 3 welding wire production lines. Our companys registered capital is 30,000,000 RMB, with an annual output of 2,000 tons welding wire and 35,000 Square meters wear plate.

 

Scientific management mode makes us become one of the top ten honest suppliers and top 100 suppliers in Guangxi credit enterprises and cement industry. At the same time, we also passed the ISO9001-2008 international quality system certification.

 

Packaging & Shipping

Packaging details

1.6mm-2.0mm Open arc hardfacing flux cored welding wire:

15KG/Spool,72 cartons/ pallet.

 2.8mm Open arc hardfacing flux cored welding wire:

250kg/drum, 4 drums/pallet

and per spool is vacuum packed by aluminum foil bag in a carton,

 

Set up a quantity

 

250 kilos

 

Warranty

1 year

Payment

T/T,L/C,D/P, Western Union

 

The products are exported to South Korea, Indonesia,Vietnam,Brazil, Peru, Australia etc.

Our advantages:
1. Chemical composition: high carbon and high chromium
2. Hardness: HRC5862
3.Three. Excellent performance: no slag, low spatter, smooth surface, high welding efficiency, stable filling rate and so on.
4. There is no welding wire with any joints.
5. Production capacity: 5500 tons per year
6. Short delivery time: 7-10 days in general.
7. We have many experienced professionals to research and develop welding wire according to the specific chemical composition of customers.
8. We can recommend suitable welding wires and provide technical solutions according to working conditions.
9. Site inspection and third party inspection.
10. As a manufacturer of ISO 9001:2008 certification, our mission is to improve our management system and constantly provide high quality products.

FAQ

Q:Are you trading company or manufacturer?
A:We are factory.
Q:How long is your delivery time?
A:Generally it is 5-10 days of the goods are in stock,or it is 15-20 days if
    the goods are not in stock,it is according to quantitiy.
Q:Do you provide samples?is it free or extra?
A:Yes,we could offer the sample for free charge.
Q:What is your terms of payment?
A:Payment≤1000USD,100% in advance.payment>1000USD,30%T/T in advance,balance before shippment.