Biomass hot water boiler is mainly used for heating and bathing.The hot water boiler circulates the hot water in the heat preservation water tank through the hot water circulation pump.The hot water boiler circulates the hot water in the heating pipe through the hot water circulation pump, through the radiator (radiator) can meet the needs of peoples heating;Hot water boiler and hot water circulation pump with heat exchanger can achieve the home, hotel and other places bath and heating double eff.
1. Feed anti-tempering device
The primary feeding is mainly used to control the fuel feeding amount, ensure the reasonable fuel supply, and ensure that there is no excess fuel in the feeding rod under the operating conditions.When the furnace is stopped, the anti-tempering sprinkler device can automatically spray water to prevent the feeders from tempering, thus saving energy and ensuring safety.
2. Reasonable structure
European vertical fire tube design structure, different from Chinese traditional boiler design concept, thermal efficiency up to 93%.After the normal starting of combustion for five minutes, the water temperature into the boiler instantly rises from 10ºC to 60ºC;At the same time, the water output increased by 18% compared with the same type of products in the industry.
3. Intelligent control
The feeding system is reasonably equipped with intelligent oxygen sensing device. When the oxygen content is lower than the set standard, the feeding system will automatically control the feeding amount to ensure the best energy-saving and environmental protection effect of the boiler.
4. Scientific maintenance
Scientific and reasonable furnace design structure, convenient maintenance and cleaning, reduce the failure rate of products, extend the service life of the boiler.
|Working pressure||Normal pressure|
|Rated thermal power||1500,000 kcal|
|Induced draft fan power||4000W|
|Water inlet diameter||140mm|
|Fuel consumption||286 kg/h|
2. The main system adopts the most advanced combustion technology in Europe, so that biomass particles can be fully burned. The heat exchanger adopts the return flow mode, so that the residence time of high-temperature flue gas in the heat exchanger increases and the heat efficiency is improved.
3. The second-level feeding device solves the hidden danger of safety, slows down the load of the feeding system, and correspondingly reduces the amount of electric energy used by the feeding motor.
4, intelligent control system, high degree of intelligent automation, complete functions, stable performance, simple operation.
Hotel, bath center, breeding industry heating and hot water
Hotel, beauty salon, pedicure bath, baby bath, villa heating hot water and other hotels, pedicure club heating hot water.
The advantages of using biomass as fuel:
1. High calorific value of fuel: biomass particles have high calorific value, and the calorific value is about 3,900-4800kcal /kg.
2. High purity fuel: the biomass particle fuel has high purity and does not contain any other impurities that will consume heat instead of heating, which will directly reduce the cost for the enterprise.
3. Long service life: biomass particle fuel does not contain sulfur and phosphorus, does not corrode the boiler, can extend the service life of the boiler.