High Quality Cco Crusher Roller Repair Hardfacing Flux Cored Wire

Model NO.
Chromium Carbide Percentage
Niobium Carbide Percentage
China (Mainland)
abide by the contract", conforms on the market requirement, joins within the market competition by its superior quality likewise as provides far more comprehensive and great company for shoppers to let them develop into huge winner. The pursue on the corporation, is definitely the clients' gratification for High Quality Cco Crusher Roller Repair Hardfacing Flux Cored Wire, The product will supply to all over the world, such as: Swiss, Slovenia, Colombia, Being the top solutions of our factory, our solutions series have been tested and won us experienced authority certifications. For additional parameters and item list details, please click the button to acquire additional nformation.
Guangxi Fehong Wear Resistant Technology Co., Ltd. Diamond / Audited Supplier

Product Description

HH-814 carbide flux cored wire It is a kind of high wear resistance, because it can separate fine and very hard niobium carbide, so that the surfacing material containing initial carbide is extremely wear resistant and has general impact resistance, but it has strong resistance to spalling, is not suitable for flame cutting, can not be processed, there will be cracks, but it will not affect the performance.

Main chemical composition and hardness of surfacing welding:


2.8mm carbide flux cored wire 













Current (A)


Voltage (V)


Stick out (mm)



carbide flux cored wire Usually, it is suitable for hard surface treatment of parts withstanding high wear and general impact, such as extrusion roll pattern, grinding roll surface and mill roll. The application temperature is not more than 350°C. In the process of use, no inert gas is used on the positive electrode (AC can also be used), swing welding is standard, arc. To be as short as possible, the thickness of surfacing surface should be less than 12 mm, and preheating will reduce stress cracks.

Related Products:
HH-806 carbide flux cored wire:
It is suitable for laying the bottom layer and surfacing harder materials on it. It is used for manufacturing or repairing grinding rollers, extrusion rollers, crane wheels, etc.
Welding hardness: 200-250HB
Diameter: 2.8mm

HH-810 carbide flux cored wire:
Suitable for high and medium impact wear under component hardfacing, for example: vertical mill roller, grinding, extrusion roller, propeller (device), surface layer, sand dredging machine, planing plate at the top of the tooth, the application temperature not exceeding 350°C
Welding hardness: 58-63HRC
Diameter: 2.8mm

hardfacing welding wire product show:

More choices:

Our company wear resistant flux cored welding wire Production process:

After cutting and joining into the steel strip with our fixed width, the roller squeezes our steel strip into “U Type” form (1.2) and filled up with flux powder with our own special ingredient(3.4). The primary carbide flux cored wire processing are continuously to stretch through the different diameter of the abrasive tool( After that, our carbide flux cored wire processing  are going to be packed without a joint into Drum (9) or Spool with water poof and desiccant. During the process and after process we have strictly inspection policy about the filling rate, bending rate, chemical composition and welding perform etc.

Our hardfacing welding wires have remarkable excellent high abrasion, impact, corrosion and heat resistance performance, could produce wear resistant plates, and hardfacing treatment of the abrasived and impacted components, could extend the service life of the components, or pre emptively on new components, or as part of manitenance programme.

Main Features:

1. Chemical Composition: High carbon high chromium
2. Hardness: HRC57-65
3. Good Performance: no clearing slag, low welding spatter, smooth surface, high welding efficiency, stable filling rate, etc.
4. Welding wire without any joints.
5. Production Capacity: 2000 tons per year
6. Short Delivery Time: Generally 10 days
7. We have many experienced professionals to research and develop welding wires according to customers specified chemical compositions.
8. We can recommend proper welding wires and provide technical solutions based on working conditions.
9. On site inspection and third party inspection are available.
10. As an ISO9001:2008 approved manufacture, our mission is to improve our management system and provide high quality products continuously.

Company Information


Now we have more than 140 employees, including more than 10 R&D staffs. And more than 20 wear plate production lines, 3 welding wire production lines. Our companys registered capital is 30,000,000 RMB, with an annual output of 2,000 tons welding wire and 35,000 Square meters wear plate.

Scientific management mode makes us become one of the top ten honest suppliers and top 100 suppliers in Guangxi credit enterprises and cement industry. At the same time, we also passed the ISO9001-2008 international quality system certification.

Packaging & Shipping

Packaging details

1.6mm-2.0mm carbide flux cored wire:

15KG/Spool,72 cartons/ pallet.

 2.8mm carbide flux cored wire:

250kg/drum, 4 drums/pallet

and per spool is vacuum packed by aluminum foil bag in a carton,


Set up a quantity


250 kilos



1 year


T/T,L/C,D/P, Western Union

The products are exported to South Korea, Indonesia,Vietnam,Brazil, Peru, Australia etc.

Our advantages:
1. Chemical composition: high carbon and high chromium
2. Hardness: HRC57-65
3.Three. Excellent performance: no slag, low spatter, smooth surface, high welding efficiency, stable filling rate and so on.
4. There is no welding wire with any joints.
5. Production capacity: 5500 tons per year
6. Short delivery time: 7-10 days in general.
7. We have many experienced professionals to research and develop welding wire according to the specific chemical composition of customers.
8. We can recommend suitable welding wires and provide technical solutions according to working conditions.
9. Site inspection and third party inspection.
10. As a manufacturer of ISO 9001:2008 certification, our mission is to improve our management system and constantly provide high quality products.


Q:Are you trading company or manufacturer?
A:We are factory.
Q:How long is your delivery time?
A:Generally it is 5-10 days of the goods are in stock,or it is 15-20 days if
    the goods are not in stock,it is according to quantitiy.
Q:Do you provide samples?is it free or extra?
A:Yes,we could offer the sample for free charge.
Q:What is your terms of payment?
A:Payment≤1000USD,100% in advance.payment>1000USD,30%T/T in advance,balance before shippment.