|Poly solar panel 100Watt|
|Electrical performance parameter(STC)|
|Maximum Power Voltage-Vmp||V||18|
|Maximum Operating Current-Imp||A||5.56|
|Open circuit voltage-Voc||V||21.6|
|Maximum System Voltage-VDC||V||1000|
|Solar Cell Efficiency-ηm||%||>17.7%|
|Standard test condition||STC||Irradiance1000W/m2 ,ambient temperature25ºC ,Atmospheric qualityAM1.5|
|Components & Mechanical Data|
|Solar Cell||Poly silicon,156*156mm slice|
|Number of Cell||36 pc|
|Size of Module||999*660*25|
|Weight Per Piece||7.0kg|
|Module glass||3.2mm,High penetration, anti – reflection suede toughened glass.|
|Module backplane||0.35mm white|
|Module frame||Silver and anodized aluminum alloy|
|Junction Box Type||PV-LH0805|
|Temperature Coefficients of Voc(%)°C||-0.41%/ºC|
|Temperature Coefficients of Pm(%)°C||-0.32%/ºC|
|Temperature Coefficients of Im(%)°C||0.055%/ºC|
Features of poly solar module:
1.High efficiency solar cells with high transmission and textured glass are delivering high efficiency for modules;
2.Bypass diode minimizes the power drop caused by shade;
3.Tempered glass, EVA resin, and weatherproof film, plus aluminum
frame for extended outdoor use;
4.Modules independently tested to ensure conformance with certification
and regulatory standards;
5. Manufacturing facility certified to ISO9001 ISO14001 quality management system standards.
Description of every parts:
1.Junction Box in proof-water with TUV Certificate
2.Solar Cable & Connector with TUV Certificate
4.Toughed Glass: The glass is super white cloth grain of toughened glass , the thickness of 3.2mm , the solar cell spectral response range of wavelengths (320-1100 nm), light transmittance over 91% , Ultraviolet light radiation , light transmittance is not falling .Toughened glass is made of components can withstand 25 mm in diameter of hockey hit at a speed of 23 m/s.
5.EVA: 0.5 mm thickness with high quality EVA film as sealant of solar cell and and the connection between the glass, TPT agent. With high light transmittance and anti-aging ability. Solar cell encapsulation of EVA film after curing performance requirements:
Light transmittance is greater than 91% ; Crosslinking degree is during from 70 to 90% ; Peel strength (N/cm), glass/film is more than 30 ; TPT/film is more than 15 ; Temperature resistance is from - 40° C to 85° C.
6.TPT BackSheet: the back of the solar panel, ageing resistance , corrosion resistance , resistance to ultraviolet radiation, airtight, etc. Basic requirements.
7.Frame: aluminum alloy frame with high intensit , mechanical shock resistance ability.Strong, lightweight aluminum frame design with reinforced sealing and load hold to prevent freezing and warping, and stand against high wind.