Independent R&D of Silicone Roller, Only The Best for You——DMAIS
|Model Number||TJ-170||Speed Gear Controling||Variable|
|Nominal Voltage||110V/220V||Maximum roll film OD||200mm|
|Power||200W||The diameter specification of Roll film||3 inches|
|Heating Power||1500W||The raise height of roller||30mm|
|Frequency Respons||50HZ-60HZ||Method of pressure adjustment||Pneumatic|
|Operating Temperature||0ºC-60ºC||Automatically uncovering film androlling body paper equipment||Motor|
|Scope Of Suitable Film Tthickness||10-250μm||Foot-propelled switch||Yes|
|Warm-up Time||0-10/Min||Diameter of roller||130mm|
|Laminating speed||0-10m/Min||Product Size(mm)||2000×660×1300|
|Laminating Thickness||28mm||Packing Size(mm)||2100×630×670|
1.Unique method of putting film from the back, easily operate.
2.Unilateral linkage , up and down easily.
3.Three laminating ways: auto/foot control/manual.
4.Stepless speed regulation.
5.With reversing function.
6. Uncovering backing paper and finishing products automatically.
7. Only need one person to operate, save cost.
8.Heating to 60ºC to avoid bubble thoroughly.
9. High efficiency and high yield of laminating, whole film of 50m dont bevel.
10. Film and paper tightness-degree system make the cold lamination have good tension, reduce the risk of laminating fold.
11.Infrared ray control temperature, much precise to control temperature.